Gaggimate · Reviewed by The Coffee Bill · Published 2026-05-08
Based on a review by The Coffee Bill (accessed 2026-05-08).
Based on this review alone: buy it if you care about color-coded wiring and clear instructions make installation straightforward — just accept requires careful attention to plumbing seals to prevent leaks, as experienced by the reviewer.
The reviewer concludes that with patience, the Gaggimate Pro and LED light can be successfully installed, preparing the machine to make "fantastic coffee."
This video provides a comprehensive, single-part guide for installing the Gaggimate Pro modification kit and a Shades of Coffee LED light into an espresso machine. The creator demonstrates the step-by-step process covering wiring, component replacement, software flashing, and plumbing.
Installing the Gaggimate Pro upgrade kit is a manageable task for DIY enthusiasts, largely due to its clear, color-coded instructions and well-explained flashing process. The kit enables significant upgrades like a new PT100 temperature sensor and a pressure transducer for profiling, demonstrating a noticeable improvement over the original setup. An initial plumbing leak required attention, underscoring the critical need for careful sealing of all connections to protect the new electricals. If you possess patience and are comfortable following detailed instructions, this kit offers a rewarding upgrade experience for your coffee machine. However, if plumbing or electronics are entirely new to you, seeking experienced assistance might prevent potential issues.
reviewer_claimstrong
reviewer_claimmoderate
reviewer_claimstrong
reviewer_claimmoderate
reviewer_claimstrong
reviewer_claimmoderate
reviewer_claimpositivet=00:30–00:46
The wiring process for the Gaggimate Pro is described as "really easy" because all wires are color-coded in the kit, and instructions are clear, allowing installation without much prior machine knowledge.
visual_inspectionneutralt=00:46–01:05
The reviewer shows two old thermostats and three wires from the steam switch that are no longer needed with the Gaggimate Pro installation. These wires should be insulated with electrical tape.
hands_on_demoneutralt=01:13–01:19
The reviewer demonstrates popping in the required wires for the Oka vibratory pump according to the diagram.
hands_on_demoneutralt=01:43–01:50
The reviewer installs the new PT100 temperature sensor where the old brew switch was, emphasizing not to twist the wires.
hands_on_demoneutralt=01:50–02:08
The screen needs to be carefully aligned and sealed after removing the sticky backing, ensuring it's symmetrical in the middle of the circular cutout.
reviewer_claimneutralt=02:08–02:17
The reviewer explains that the screen needs to be "flashed" to run the Gaggimate Pro program settings, as it initially only shows a clock.
reviewer_claimpositivet=02:17–02:29
The main control board ("brain") of the machine needs to be flashed by plugging it into a computer via USB-C, a process described as not long and well-explained.
hands_on_demoneutralt=02:29–02:35
The reviewer places the main control board ("brain") into a 3D printed enclosure to keep it safe inside the machine.
hands_on_demoneutralt=02:44–03:22
The plumbing steps include installing a pressure transducer, applying PTFE tape to ensure no leaks, and cutting and flushing new tubing before connecting it with push-fit fittings.
reviewer_claimmixedt=03:22–03:29
The pressure transducer provides a "pretty good" way of measuring pressure, suitable for pressure profiling, although it's noted as "not as accurate as some."
reviewer_claimmixedt=03:52–04:05
The reviewer encountered a leak after initial assembly, which was fixed by applying PTFE tape to a specific part of the pump that was initially overlooked.
hands_on_demopositivet=04:05–04:18
The Shades of Coffee LED light installation is described as "super simple," involving taking out two wires, piggybacking them to the LED strip, threading it through the machine, and securing it.
The reviewer states that the wiring is very easy due to color-coded wires and comprehensive instructions, making it manageable even without extensive machine knowledge. He highlights that flashing the components is also quick and well-explained, implying overall ease.
The installation involves removing two old thermostats and insulating three unused wires that previously connected to the steam switch, indicating that the Gaggimate Pro system streamlines and replaces older components.
The reviewer clearly states that the screen needs to be "flashed" to enable Gaggimate Pro functionality beyond just a clock, and the main control board also requires flashing by connecting it via USB-C to a computer.
The reviewer notes that the pressure transducer provides a "pretty good" method for measuring pressure, suitable for pressure profiling tasks. However, he also clarifies that it's "not as accurate as some" other measurement methods.
The reviewer demonstrates that the Shades of Coffee LED light is installed by simply connecting two existing wires to the LED strip, threading it through the machine, and securing it, describing the process as "super simple."
85/100 source quality
The video walks through the complete installation of the Gaggimate Pro and a Shades of Coffee LED light. It starts with the wiring, which is described as easy due to color-coded instructions. The reviewer then demonstrates installing new components like the pump, temperature sensor, and screen, emphasizing the importance of careful alignment and sealing. Software flashing for both the screen and the main control board is covered, followed by the plumbing steps, including the pressure transducer and leak prevention with PTFE tape. The video concludes with the simple installation of the LED light and a final check, addressing a minor leak encountered during the process.
Full transcript is not redistributed here to respect the original creator’s rights.
This page converts The Coffee Bill's review of the Gaggimate Gaggimate Pro into structured evidence — timestamped claims, pros & cons, and buyer questions. It is not the original review and does not replace watching or reading the full source.